Coated solid carbide tool with right-hand helix, redesigned for machining non-ferrous metals. It resists abrasive wear during the cutting process and prevents aluminium from sticking to the cutting edge:

· Hard and abrasive aluminium alloys.
· Soft aluminium alloys prone to material build-up.
· Aluminium composite panels (Dibond®, Alucobond®, or similar).
· Copper, brass, zinc, etc.

Solid carbide tool, designed for 90º bending and balanced for high-feed machining with a perfect finish. Especially recommended for slotting, chamfering and bending in:

· Aluminium composite panels (Dibond®, Alucobond® or similar).
· Aluminium and other non-ferrous metals.

Solid carbide tool with an extremely sharp single flute and polished multifaceted right-hand helix. Designed to deliver high performance and quality finishes when machining plastics, wood and derived materials commonly used in the signmaking sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Solid carbide tool with right-hand helix, part of the Multix PRO family. Designed for demanding machining, offering a longer overall length (L1), longer cutting length (L2) and neck (L3).

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Extremely sharp single-flute solid carbide tool with a multifaceted, polished right-hand helix. Designed to deliver high performance and excellent surface finish when machining plastics, woods and derived materials, commonly used in the signage sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Extremely sharp single-flute solid carbide tool with a multifaceted, polished right-hand helix. Designed to deliver high performance and excellent surface finish when machining plastics, woods and derived materials, commonly used in the signage sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Solid carbide tool with a micro-polished helical flute, designed for engraving and folding. It allows fast chip evacuation, leaving a clean, burr-free surface on plastics and non-ferrous metals.

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Aluminium and aluminium composites: Dibond®, Alucobond®, etc.
· Copper, brass, zinc, etc.

Solid carbide tool with an extremely sharp single flute and polished multifaceted right-hand helix. Designed to deliver high performance and excellent finish quality when machining plastics, woods and wood derivatives commonly used in the signmaking sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine chipboard, plywood, etc).

Submicron solid carbide tool with high wear resistance and chip breaker. Its geometry and helix finish are optimised for efficient chip evacuation, allowing high feed rates. Designed to achieve perfect finishes without delamination on the outer layers.

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

Manufactured in polished solid carbide with a right-hand helix, this series is specially developed to achieve exceptional surface finishes on thermoplastics, even at high feed rates. Its innovative geometry allows optimal finishes in a single cutting pass on materials such as:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc

Part of the Downcut series, developed in submicron solid carbide Z2 with high wear resistance. Its geometry is designed for trimming, slotting, and mortising, offering optimal finishes without delamination on the top side of the workpiece.

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

High wear-resistant solid carbide tool, designed with an innovative gradual-action chip breaker. Acts as a heat dissipator and cutting stabiliser, allowing machining of high-density materials at high feed rates, achieving quality finishes without marking the edge. Recommended for cutting:

· High-pressure laminates (HPL, Trespa®, Formica®).
· Bakelite.
· High-density cellulose laminates.
· Hardwoods and phenolic plywood.

RH: right-hand helix.
LH: left-hand helix.