Solid carbide tool with an extremely sharp single flute and polished multifaceted right-hand helix. Designed to deliver high performance and quality finishes when machining plastics, wood and derived materials commonly used in the signmaking sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Solid carbide tool with right-hand helix, part of the Multix PRO family. Designed for demanding machining, offering a longer overall length (L1), longer cutting length (L2) and neck (L3).

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Extremely sharp single-flute solid carbide tool with a multifaceted, polished right-hand helix. Designed to deliver high performance and excellent surface finish when machining plastics, woods and derived materials, commonly used in the signage sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Extremely sharp single-flute solid carbide tool with a multifaceted, polished right-hand helix. Designed to deliver high performance and excellent surface finish when machining plastics, woods and derived materials, commonly used in the signage sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Solid carbide tool with an extremely sharp single flute and polished multifaceted right-hand helix. Designed to deliver high performance and excellent finish quality when machining plastics, woods and wood derivatives commonly used in the signmaking sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine chipboard, plywood, etc).

Submicron solid carbide tool with high wear resistance and chip breaker. Its geometry and helix finish are optimised for efficient chip evacuation, allowing high feed rates. Designed to achieve perfect finishes without delamination on the outer layers.

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

Part of the Downcut series, developed in submicron solid carbide Z2 with high wear resistance. Its geometry is designed for trimming, slotting, and mortising, offering optimal finishes without delamination on the top side of the workpiece.

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

High wear-resistant solid carbide tool, designed with an innovative gradual-action chip breaker. Acts as a heat dissipator and cutting stabiliser, allowing machining of high-density materials at high feed rates, achieving quality finishes without marking the edge. Recommended for cutting:

· High-pressure laminates (HPL, Trespa®, Formica®).
· Bakelite.
· High-density cellulose laminates.
· Hardwoods and phenolic plywood.

RH: right-hand helix.
LH: left-hand helix.

Tool from the Multix Pro family, made of solid carbide with a right-hand helix. Designed to handle demanding machining thanks to its longer overall length (L1), longer cutting length (L2) and neck (L3). Recommended for high-precision and deep cuts in:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine chipboard, plywood, etc).

Part of the Multix PRO series. Made of solid carbide with an extremely sharp single-flute cutting edge and a left-hand micro-polished helix with mirror finish, optimizing chip evacuation and reducing the risk of collapse or clogging during machining.

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine chipboard, plywood, etc).

Made from submicron grain carbide, this Downcut series tool offers high wear resistance. Its geometry is designed for trimming, slotting and dado cuts, ensuring an optimal finish without delamination on the top surface of the workpiece. Suitable for use with:

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

Part of the compression series, developed in high wear-resistant submicron grain carbide and equipped with chip breakers. Its geometry and helix finishes are highly optimised for efficient chip evacuation, allowing use at high feed rates. Designed to deliver high-quality finishes, free of delamination on the outer layers of:

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.