This coated solid carbide tool, with right-hand helix, is part of the ALU Endurance CC series. Thanks to an innovative multi-layer coating that provides low friction and high wear resistance, it can machine any type of aluminium alloy –even dry– without the need for lubrication:

· Aluminium.
· Aluminium composite panels (Dibond®, Alucobond®, or similar).
· Copper, brass, zinc, etc.

Solid carbide tool with left-hand helix, part of the ALU Endurance CC range. Its geometry is designed to improve workpiece holding under low vacuum conditions. Ideal for cutting thin materials or those prone to delamination, such as:

· Aluminium.
· Aluminium composite panels (Dibond®, Alucobond®, or similar).
· Copper, brass, zinc, etc.

Coated solid carbide tool with right-hand helix, designed to optimise the machining of non-ferrous metals. Part of a series developed to withstand abrasive wear during cutting and prevent aluminium from sticking to the cutting edge:

· Hard and abrasive aluminium alloys.
· Soft aluminium alloys prone to material build-up.
· Aluminium composite panels (Dibond®, Alucobond®, or similar).
· Copper, brass, zinc, etc.

Coated solid carbide tool with right-hand helix, redesigned for machining non-ferrous metals. It resists abrasive wear during the cutting process and prevents aluminium from sticking to the cutting edge:

· Hard and abrasive aluminium alloys.
· Soft aluminium alloys prone to material build-up.
· Aluminium composite panels (Dibond®, Alucobond®, or similar).
· Copper, brass, zinc, etc.

Solid carbide tool, designed for 90º bending and balanced for high-feed machining with a perfect finish. Especially recommended for slotting, chamfering and bending in:

· Aluminium composite panels (Dibond®, Alucobond® or similar).
· Aluminium and other non-ferrous metals.

Solid carbide tool with an extremely sharp single flute and polished multifaceted right-hand helix. Designed to deliver high performance and quality finishes when machining plastics, wood and derived materials commonly used in the signmaking sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Solid carbide tool with right-hand helix, part of the Multix PRO family. Designed for demanding machining, offering a longer overall length (L1), longer cutting length (L2) and neck (L3).

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Extremely sharp single-flute solid carbide tool with a multifaceted, polished right-hand helix. Designed to deliver high performance and excellent surface finish when machining plastics, woods and derived materials, commonly used in the signage sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Extremely sharp single-flute solid carbide tool with a multifaceted, polished right-hand helix. Designed to deliver high performance and excellent surface finish when machining plastics, woods and derived materials, commonly used in the signage sector. Its great versatility makes it the ideal choice for cutting:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine particleboard, plywood, etc).

Solid carbide tool with a micro-polished helical flute, designed for engraving and folding. It allows fast chip evacuation, leaving a clean, burr-free surface on plastics and non-ferrous metals.

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Aluminium and aluminium composites: Dibond®, Alucobond®, etc.
· Copper, brass, zinc, etc.

Submicron solid carbide tool with high wear resistance and chip breaker. Its geometry and helix finish are optimised for efficient chip evacuation, allowing high feed rates. Designed to achieve perfect finishes without delamination on the outer layers.

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

Manufactured in polished solid carbide with a right-hand helix, this series is specially developed to achieve exceptional surface finishes on thermoplastics, even at high feed rates. Its innovative geometry allows optimal finishes in a single cutting pass on materials such as:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc