Manufactured in polished solid carbide with a right-hand helix, this series is specially developed to achieve exceptional surface finishes on thermoplastics, even at high feed rates. Its innovative geometry allows optimal finishes in a single cutting pass on materials such as:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc

Part of the Downcut series, developed in submicron solid carbide Z2 with high wear resistance. Its geometry is designed for trimming, slotting, and mortising, offering optimal finishes without delamination on the top side of the workpiece.

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

High wear-resistant solid carbide tool, designed with an innovative gradual-action chip breaker. Acts as a heat dissipator and cutting stabiliser, allowing machining of high-density materials at high feed rates, achieving quality finishes without marking the edge. Recommended for cutting:

· High-pressure laminates (HPL, Trespa®, Formica®).
· Bakelite.
· High-density cellulose laminates.
· Hardwoods and phenolic plywood.

RH: right-hand helix.
LH: left-hand helix.

Tool from the Multix Pro family, made of solid carbide with a right-hand helix. Designed to handle demanding machining thanks to its longer overall length (L1), longer cutting length (L2) and neck (L3). Recommended for high-precision and deep cuts in:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine chipboard, plywood, etc).

Part of the Multix PRO series. Made of solid carbide with an extremely sharp single-flute cutting edge and a left-hand micro-polished helix with mirror finish, optimizing chip evacuation and reducing the risk of collapse or clogging during machining.

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Woods and derivatives (MDF, melamine chipboard, plywood, etc).

Innovative solid carbide tool with a unique cutting edge and micro-polished right-hand helix with mirror finish, designed to ensure stable, vibration-free cutting even at high feed rates and cutting depths greater than 2xD1.

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, PET, HDPE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.

Solid carbide tool with a micro-polished right-hand helix, specially designed to achieve high-quality surface finishes on thermoplastics, even at high feed rates. Its innovative geometry allows for optimal finishes in a single cutting pass on materials such as:

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.

Innovative coated solid carbide tool designed for machining non-ferrous metals. Right-hand helix geometry resists abrasive wear and prevents aluminum adhesion on the cutting edge during machining.

· Hard and abrasive aluminum alloys.
· Soft aluminum alloys prone to re-welding.
· Aluminum composites: Dibond®, Alucobond®, etc.
· Copper, brass, zinc, etc.

Coated solid carbide tool with right-hand helix, part of the ALU Endurance CC series. Its multilayer coating provides a low friction coefficient and high wear resistance, allowing machining of any aluminum alloy –even dry machining– without lubrication.

· Aluminum.
· Aluminum composites: Dibond®, Alucobond®, etc.
· Copper, brass, zinc, etc.

Made from submicron grain carbide, this Downcut series tool offers high wear resistance. Its geometry is designed for trimming, slotting and dado cuts, ensuring an optimal finish without delamination on the top surface of the workpiece. Suitable for use with:

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

Part of the compression series, developed in high wear-resistant submicron grain carbide and equipped with chip breakers. Its geometry and helix finishes are highly optimised for efficient chip evacuation, allowing use at high feed rates. Designed to deliver high-quality finishes, free of delamination on the outer layers of:

· Hard and soft woods.
· Plywood, MDF, melamine chipboard, OSB, etc.
· Solid Surface materials: Corian®, Krion®, Varicor®, etc.

Solid carbide tool with micropolished helical flute, designed for engraving and folding. It enables rapid chip evacuation and guarantees clean, burr-free engraving surfaces on both plastics and non-ferrous metals.

· Cast or extruded acrylic.
· PC, PVC, foamed PVC, PP, PA, PE, ABS, etc.
· Solid Surface materials: Corian®, Krion®, etc.
· Aluminum and aluminum composites: Dibond®, Alucobond®, etc.
· Copper, brass, zinc, etc.