-
Products
add remove NEW Red Fox 2 add removeFox PRO add removeRed Fox add removeAtheon CO2 Láser add removeOKU Desk add removeIon Plasma PRO add remove
- Shop
-
Academy (Spanish)
add remove Iniciación al Fresado CNC add removeFresado CNC con Aspire add removeDiseño y Fresado con Fusión 360 add removeIniciación al corte y grabado láser add remove
-
Resources
add remove
- Tech support
- About Us
- Contact
E20-8 collet
Reference: 2205
High-precision tool holder for CNC machines
D | 21 mm |
d | 8 mm |
T | 31,5 mm |
D: cutting diameter d: gripping diameter T: total length
Security policy
Shipping policy
Specific References
16 other products in the same category:
8 mm generic long double...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 8 mm |
L | 62 mm |
T | 100 mm |
C | 8 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
8 mm single flute upcut bit...
Upcut bit suitable for aluminium/PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp on laminated materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 8 mm |
L | 25 mm |
T | 60 mm |
C | 8 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
3 mm generic double flute...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 3 mm |
L | 8 mm |
T | 38,5 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
6 mm R blue spherical bit
Blue spherical bit suitable for wood and MDF
It allows 3D work that requires a 3 mm radius. Stands out for its durability. Made of tungsten carbide (TC), a harder material than HSS. Better cutting edge conservation and superior bit durability.
D | 12 mm |
L | 24 mm |
T | 75 mm |
C | 12 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
V-groove bit
V-groove bit suitable for wood and MDF
It allows to make precise engravings and bows in the edges. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 22 mm |
L | 15,5 mm |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
8 mm generic double flute...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 8 mm |
L | 32 mm |
T | 70 mm |
C | 8 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
E32-10 collet
High-precision tool holder for CNC machines
D | 33 mm |
d | 10 mm |
T | 40 mm |
D: cutting diameter d: gripping diameter T: total length
3 mm generic long double...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 3 mm |
L | 42 mm |
T | 72 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
90º V-shaped bit for...
V-shaped bit suitable for wood and MDF
It allows to make V engravings and chamfers in the edges of the wood. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 0,2/22 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
16 mm surfacing bit
Planing bit suitable for wood and MDF
It allows to rectify large surfaces quickly and efficiently. Specific for works that require a lot of flatness and to review the waste bed. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 16 mm |
L | 10 mm |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Related articles
High-precision tool holder for CNC machines
D | 21 mm |
d | 8 mm |
T | 31,5 mm |
D: cutting diameter d: gripping diameter T: total length