Español
English GB
0,2 mm engraving bit 25º
Reference: 0801
€8.00
VAT included
Engraving bit suitable for wood, plastic and aluminium
It allows to make high-precision V engravings on multiple materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 0,2 mm |
| A | 25º |
| T | 33 mm |
| C | 3,175 mm |
| N | 2 |
D: cutting diameter A: Angle T: total length C: shank diameter N: flutes number (or cutting edges)
Security policy
Shipping policy
0801
Specific References
16 other products in the same category:
3 mm generic double flute...
€8.00
Price
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 3 mm |
| L | 8 mm |
| T | 38,5 mm |
| C | 3,175 mm |
| N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
2 mm generic long double...
€8.00
Price
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 2 mm |
| L | 22 mm |
| T | 45 mm |
| C | 3,175 mm |
| N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
E20-12,7 collet (1/2 inch)
€12.00
Price
High-precision tool holder for CNC machines
| D | 21 mm |
| d | 12,7 mm |
| T | 31,5 mm |
D: cutting diameter d: gripping diameter T: total length
10 mm generic single flute...
€29.00
Price
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. Possible chipping on top of some solid woods such as pine. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 10 mm |
| L | 32 mm |
| T | 80 mm |
| C | 10 mm |
| N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
16 mm surfacing bit
€15.00
Price
Planing bit suitable for wood and MDF
It allows to rectify large surfaces quickly and efficiently. Specific for works that require a lot of flatness and to review the waste bed. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 16 mm |
| L | 10 mm |
| T | - |
| C | 6 mm |
| N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
3 mm generic long double...
€9.00
Price
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 3 mm |
| L | 42 mm |
| T | 72 mm |
| C | 3,175 mm |
| N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
E32-12,7 collet (1/2 inch)
€12.00
Price
High-precision tool holder for CNC machines
| D | 33 mm |
| d | 12,7 mm |
| T | 40 mm |
D: cutting diameter d: gripping diameter T: total length
Type 4 molding bit
€15.00
Price
Molding bit suitable for wood and MDF
It allows to create moldings with different profiles in a simple way. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 25 mm |
| L | - |
| T | - |
| C | 6 mm |
| N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
8 mm double flute straight...
€25.00
Price
Straight cutting bit suitable for wood, melamine and foams
Straight cutting direction, gives a good surface finish keeping cutting capacity. It doesn't flake the upper face and allows to use passing depths similar to those of upcut. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 8 mm |
| L | 32 mm |
| T | 60 mm |
| C | 8 mm |
| N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
E20-4 collet
€12.00
Price
High-precision tool holder for CNC machines
| D | 21 mm |
| d | 4 mm |
| T | 31,5 mm |
D: cutting diameter d: gripping diameter T: total length
Nuestros clientes opinan
0 Comments
Related articles
What types of end mills can we use in the Red Fox CNC milling machine series?
Looking to optimise your CNC milling with the Red Fox series? Learn about different types of CNC end mills, from...
Read more
Engraving bit suitable for wood, plastic and aluminium
It allows to make high-precision V engravings on multiple materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
| D | 0,2 mm |
| A | 25º |
| T | 33 mm |
| C | 3,175 mm |
| N | 2 |
D: cutting diameter A: Angle T: total length C: shank diameter N: flutes number (or cutting edges)