-
Products
add remove NEW Red Fox 2 add removeFox PRO add removeRed Fox add removeAtheon CO2 Láser add removeOKU Desk add removeIon Plasma PRO add remove
- Shop
-
Academy (Spanish)
add remove Iniciación al Fresado CNC add removeFresado CNC con Aspire add removeDiseño y Fresado con Fusión 360 add removeIniciación al corte y grabado láser add remove
- Resources add remove
- Tech support
- About Us
- Contact
2 mm generic long double flute upcut bit
Reference: 0403
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 2 mm |
L | 22 mm |
T | 45 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Security policy
Shipping policy
Specific References
16 other products in the same category:
0,2 mm engraving bit 45º
Engraving bit suitable for wood, plastic and aluminium
It allows to make high-precision V engravings on multiple materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 0,2 mm |
A | 45º |
T | 33 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter A: Angle T: total length C: shank diameter N: flutes number (or cutting edges)
3 mm single flute upcut bit...
Upcut bit suitable for aluminium/PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp on laminated materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 3,175 mm |
L | 12 mm |
T | 38,5 mm |
C | 3,175 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
10 mm generic double flute...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 10 mm |
L | 32 mm |
T | 80 mm |
C | 10 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
120º diamond tip engraving bit
Engraving bit suitable for high hardness materials
It allows to make hihg-precision V engravings. Stands out for its durability. Made of diamond coating on CT (PCT). The hardest material and with the highest edge durability; Specific for hard materials.
D | 0,6 mm |
A | 120º |
T | 45 mm |
C | 6 mm |
N | 2 |
D: cutting diameter A: Angle T: total length C: shank diameter N: flutes number (or cutting edges)
2 mm generic double flute...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 2 mm |
L | 8 mm |
T | 38,5 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
10 mm generic long double...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 10 mm |
L | 72 mm |
T | 120 mm |
C | 10 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Type 2 molding bit
Molding bit suitable for wood and MDF
It allows to create moldings with different profiles in a simple way. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 22 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
0,5 mm engraving bit 45º
Engraving bit suitable for wood, plastic and aluminium
It allows to make high-precision V engravings on multiple materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 0,5 mm |
A | 45º |
T | 33 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter A: angle T: total length C: shank diameter N: flutes number (or cutting edges)
3,17 mm generic single...
Downcut bit suitable for plywood, dibond, plated DM and melamine board
Downcut direction, offers a better surface finish. Lower passing depths are recommended. Ideal for materials that chip at the top or are composed of layers. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 3,175 mm |
L | 22 mm |
T | 45 mm |
C | 3,175 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
8 mm TC double flute...
Straight cutting bit suitable for wood, melamine and foams
Straight cutting direction, gives a good surface finish keeping cutting capacity. It doesn't flake the upper face and allows to use passing depths similar to those of upcut. Made of tungsten carbide (TC), a harder material than HSS. Better cutting edge conservation and superior bit durability.
D | 8 mm |
L | 26 mm |
T | - |
C | 12,7 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
1,5 mm double flute...
Straight cutting bit suitable for wood, melamine and foams
Straight cutting direction, gives a good surface finish keeping cutting capacity. It doesn't flake the upper face and allows to use passing depths similar to those of upcut. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 1,5 mm |
L | 8 mm |
T | 38,5 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Related articles
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 2 mm |
L | 22 mm |
T | 45 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)