-
Products
add remove NEW Red Fox 2 add removeFox PRO add removeRed Fox add removeAtheon CO2 Láser add removeOKU Desk add removeIon Plasma PRO add remove
- Shop
-
Academy (Spanish)
add remove Iniciación al Fresado CNC add removeFresado CNC con Aspire add removeDiseño y Fresado con Fusión 360 add removeIniciación al corte y grabado láser add remove
- Resources add remove
- Tech support
- About Us
- Contact
6 mm generic long single flute upcut bit
Reference: 0105
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. Possible chipping on top of some solid woods such as pine. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 6 mm |
L | 72 mm |
T | 100 mm |
C | 6 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Security policy
Shipping policy
Specific References
16 other products in the same category:
8 mm single flute upcut bit...
Upcut bit suitable for aluminium/PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp on laminated materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 8 mm |
L | 25 mm |
T | 60 mm |
C | 8 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
3 mm single flute upcut bit...
Upcut bit suitable for aluminium/PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp on laminated materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 3,175 mm |
L | 12 mm |
T | 38,5 mm |
C | 3,175 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
8 mm generic long single...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. Possible chipping on top of some solid woods such as pine. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 8 mm |
L | 62 mm |
T | 100 mm |
C | 8 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Type 1 molding bit
Molding bit suitable for wood and MDF
It allows to create moldings with different profiles in a simple way. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 25 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
90º diamond tip engraving bit
Engraving bit suitable for high hardness materials
It allows to make hihg-precision V engravings. Stands out for its durability. Made of diamond coating on CT (PCT). The hardest material and with the highest edge durability; Specific for hard materials.
D | 0,6 mm |
A | 90º |
T | 45 mm |
C | 6 mm |
N | 2 |
D: cutting diameter A: angle T: total length C: shank diameter N: flutes number (or cutting edges)
0,2 mm engraving bit 45º
Engraving bit suitable for wood, plastic and aluminium
It allows to make high-precision V engravings on multiple materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 0,2 mm |
A | 45º |
T | 33 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter A: Angle T: total length C: shank diameter N: flutes number (or cutting edges)
0,5 mm engraving bit 25º
Engraving bit suitable for wood, plastic and aluminium
It allows to make high-precision V engravings on multiple materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 0,5 mm |
A | 25º |
T | 33 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter A: angle T: total length C: shank diameter N: flutes number (or cutting edges)
3,17 mm generic single...
Downcut bit suitable for plywood, dibond, plated DM and melamine board
Downcut direction, offers a better surface finish. Lower passing depths are recommended. Ideal for materials that chip at the top or are composed of layers. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 3,175 mm |
L | 22 mm |
T | 45 mm |
C | 3,175 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
1 mm generic double flute...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 1 mm |
L | 4 mm |
T | 38,5 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
E20-5 collet
High-precision tool holder for CNC machines
D | 21 mm |
d | 5 mm |
T | 31,5 mm |
D: cutting diameter d: gripping diameter T: total length
Collet Chuck C20-ER20A-100
ER20 extension bar (20 mm)
Lengthen the tool for milling in hard-to-reach areas. It fits on a 20 mm ER32 collet and allows its cutting to achieve the necessary length. Includes an ER20 collet nut and can be used as ER32 to ER20 converter.
D | 20 mm |
L | 100 mm |
C | ER20A |
D: cutting diameter L: cutting length C: shank diameter
6 mm composites multitooth...
Composites cutting bit suitable for carbon, methacrylate, plastics and epoxy
It has multiple diamond-shaped teeth and is specially designed for cutting composite materials. Good surface finish and long service life. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 6 mm |
L | 25 mm |
T | 55 mm |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Related articles
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. Possible chipping on top of some solid woods such as pine. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 6 mm |
L | 72 mm |
T | 100 mm |
C | 6 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)