-
Products
add remove NEW Red Fox 2 add removeFox PRO add removeRed Fox add removeAtheon CO2 Láser add removeOKU Desk add removeIon Plasma PRO add remove
- Shop
-
Academy (Spanish)
add remove Iniciación al Fresado CNC add removeFresado CNC con Aspire add removeDiseño y Fresado con Fusión 360 add removeIniciación al corte y grabado láser add remove
- Resources add remove
- Tech support
- About Us
- Contact
5 mm double flute upcut bit
Reference: 843658231214
Security policy
Shipping policy
Data sheet
- Diámetro de corte
- 5mm
- Longitud de corte
- 13mm
- Longitud total
- 57mm
- Diámetro de agarre
- 6mm
- Tipo
- Fresa cilíndrica
Specific References
16 other products in the same category:
8 mm generic long double...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 8 mm |
L | 62 mm |
T | 100 mm |
C | 8 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Type 2 molding bit
Molding bit suitable for wood and MDF
It allows to create moldings with different profiles in a simple way. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 22 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
16 mm surfacing bit
Planing bit suitable for wood and MDF
It allows to rectify large surfaces quickly and efficiently. Specific for works that require a lot of flatness and to review the waste bed. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 16 mm |
L | 10 mm |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
8 mm generic double flute...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 8 mm |
L | 32 mm |
T | 70 mm |
C | 8 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
E20-5 collet
High-precision tool holder for CNC machines
D | 21 mm |
d | 5 mm |
T | 31,5 mm |
D: cutting diameter d: gripping diameter T: total length
Type 4 molding bit
Molding bit suitable for wood and MDF
It allows to create moldings with different profiles in a simple way. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 25 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
4 mm double flute straight...
Straight cutting bit suitable for wood, melamine and foams
Straight cutting direction, gives a good surface finish keeping cutting capacity. It doesn't flake the upper face and allows to use passing depths similar to those of upcut. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 4 mm |
L | 32 mm |
T | 60 mm |
C | 4 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
30 mm surfacing bit
Planing bit suitable for wood and MDF
It allows to rectify large surfaces quickly and efficiently. Specific for works that require a lot of flatness and to review the waste bed. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 30 mm |
L | 15 mm |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
E20-12,7 collet (1/2 inch)
High-precision tool holder for CNC machines
D | 21 mm |
d | 12,7 mm |
T | 31,5 mm |
D: cutting diameter d: gripping diameter T: total length
E32-4 collet
High-precision tool holder for CNC machines
D | 33 mm |
d | 4 mm |
T | 40 mm |
D: cutting diameter d: gripping diameter T: total length
1,5 mm generic single flute...
Downcut bit suitable for plywood, dibond, plated DM and melamine board
Downcut direction, offers a better surface finish. Lower passing depths are recommended. Ideal for materials that chip at the top or are composed of layers. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 1,5 mm |
L | 6 mm |
T | 38,5 mm |
C | 3,175 mm |
N | 1 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)