- Pack
-
Products
add remove NEW Red Fox 2 add removeFox PRO add removeRed Fox add removeAtheon CO2 Láser add removeOKU Desk add removeIon Plasma PRO add remove
- Shop
-
Academy (Spanish)
add remove Iniciación al Fresado CNC add removeFresado CNC con Aspire add removeDiseño y Fresado con Fusión 360 add removeIniciación al corte y grabado láser add remove
- Resources add remove
- Tech support
- About Us
- Contact
Initiation kit (7 units) + wooden box
Reference: 843658231245
Security policy
Shipping policy
Data sheet
- Tipo
- Kits de fresas
Specific References
16 other products in the same category:
1 mm generic double flute...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 1 mm |
L | 4 mm |
T | 38,5 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
3 mm R blue spherical bit
Blue spherical bit suitable for wood and MDF
It allows 3D work that requires a 3 mm radius. Stands out for its durability. Made of tungsten carbide (TC), a harder material than HSS. Better cutting edge conservation and superior bit durability.
D | 6 mm |
L | 12 mm |
T | 50 mm |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
E20-12,7 collet (1/2 inch)
High-precision tool holder for CNC machines
D | 21 mm |
d | 12,7 mm |
T | 31,5 mm |
D: cutting diameter d: gripping diameter T: total length
90º V-shaped bit for...
V-shaped bit suitable for wood and MDF
It allows to make V engravings and chamfers in the edges of the wood. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 0,2/22 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
Type 1 molding bit
Molding bit suitable for wood and MDF
It allows to create moldings with different profiles in a simple way. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 25 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
60º V-shaped bit for...
V-shaped bit suitable for wood and MDF
It allows to make V engravings and chamfers in the edges of the wood. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 0,2/22 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
6 mm composites multitooth...
Composites cutting bit suitable for carbon, methacrylate, plastics and epoxy
It has multiple diamond-shaped teeth and is specially designed for cutting composite materials. Good surface finish and long service life. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 6 mm |
L | 25 mm |
T | 55 mm |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
10 mm generic double flute...
Upcut bit suitable for wood, methacrylate and PVC
Upcut direction, helps evacuation and facilitates cutting. It can leave some wisp and a slightly rough finish. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 10 mm |
L | 32 mm |
T | 80 mm |
C | 10 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)
0,5 mm engraving bit 25º
Engraving bit suitable for wood, plastic and aluminium
It allows to make high-precision V engravings on multiple materials. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 0,5 mm |
A | 25º |
T | 33 mm |
C | 3,175 mm |
N | 2 |
D: cutting diameter A: angle T: total length C: shank diameter N: flutes number (or cutting edges)
E32-6 collet
High-precision tool holder for CNC machines
D | 33 mm |
d | 6 mm |
T | 40 mm |
D: cutting diameter d: gripping diameter T: total length
Type 2 molding bit
Molding bit suitable for wood and MDF
It allows to create moldings with different profiles in a simple way. Stands out for its durability. Made of high-speed steel (HSS), a low-cost standard unhardened material used for most materials and works.
D | 22 mm |
L | - |
T | - |
C | 6 mm |
N | 2 |
D: cutting diameter L: cutting length T: total length C: shank diameter N: flutes number (or cutting edges)